imagePROGRAF PRO-6000 series (PDF) User Manual (Mac)

Changing the Type of Paper

Follow these steps to change the type of paper specified on the printer after you have loaded paper.

If you continue using the same type of paper and set Keep media type to Enable, when you load paper, the

media type selected before Enable was set is selected automatically, eliminating the need to set the media

type. (See "Using the Same Type of Paper Regularly.")

Important

• For best printing results, the printer fine-tunes the print head height and the feed amount for each type

of paper. Be sure to select the type of paper to use correctly before printing.

• Because the printer fine-tunes the feed amount for each type of paper, the margins and the size of

printed images may vary depending on the type of paper used. If margins and the size of images are

not as you expected, adjust the paper feed amount.

(See "Adjusting Feed Amount.")

• Rolls and sheets have different printing areas, and sheets having a larger bottom margin than rolls.

(See "Print Area.")

Changing the Type of Paper

Note

• When you load roll paper, a menu for selecting the media type appears on the touch screen. Tap the

media type.

If no barcode has been printed on the roll paper and you have set Manage remaining roll amount to

Enable, specify the roll length after selecting the media type. (See "Specifying the Paper Length.")

Tap paper settings display area on Home screen of touch screen.

Note

•

If the Home screen does not appear, tap the Home button.

2. Tap paper feed slot where paper whose type you want to change is loaded.