imagePROGRAF PRO-6000 series (PDF) User Manual (Mac)

Switching the Paper Source to Match the Purpose

This printer has three paper sources: Roll 1, Roll 2, and Cut Sheet.

You can facilitate printing by selecting a paper source setting that matches your media type or purpose.

The procedure for setting paper source is as follows:

Select Quality & Media from the pop-up menu of the Print Dialog

Select the media type

For Media Type, select the same paper type loaded in the printer.

Select the paper source

For Paper Source, select the item below that matches your purpose.

Roll Paper (Auto)

Feeds paper by automatically switching between Roll 1 and Roll 2 according to the print job.

Roll 1

Feeds paper from Roll 1.

Roll 2

Feeds paper from Roll 2.

Cut Sheet

Feeds paper that was cut to a specific paper size.

Important

•

The paper feed method will differ according to the paper or lower level (roll paper 2) settings, or

roll unit option settings.

4. Complete the setup

491