imagePROGRAF PRO-6000 series (PDF) User Manual (Mac)

K
• Key Format
Select either ASCII or Hex as the WEP key format. The character that can be used for the WEP key
differs depending on the selected key formats.
◦ ASCII
Specify with a 5 or 13-character string that can include alphanumeric and underscore "_"
characters. It is case-sensitive.
◦ Hex
Specify a 10-digit or 26-digit string that can contain hexadecimal (0 to 9, A to F, and a to f).
• Key Length
Length of the WEP key. Select either 64 bits or 128 bits. Longer key length allows you to set a more
complex WEP key.
L
• Link local address
An IP address generated automatically from a specific prefix (information of current network: fe80::)
and an interface identifier generated from printer's MAC address.
• Link Quality
The status of the connection between the wireless router and the printer excluding noise
(interference) is indicated with a value from 0 to 100%.
• LPR
A platform-independent printing protocol used in TCP/IP networks. It does not support bidirectional
communication.
M
• MAC Address
Also known as the physical address. A unique and permanent hardware identifier that is assigned to
network devices by its manufacturer. MAC addresses are 48 bits long and are written as a
hexadecimal number separated by colons, i.e., 11:22:33:44:55:66.
O
• Operation Status
Indicates the status on whether the printer can be used.
247