imagePROGRAF PRO-4000S series (PDF) User Manual (Windows)

Switching Roll Unit Modes
Before using the roll unit, follow these steps to select the mode you want to use.
Important
• After switching the roll unit function, you must use a separate computer to apply the roll unit settings to
the printer driver. For details, see "Reflect Roll Unit Settings in the Printer Driver" (Windows) or "Reflect
Roll Unit Settings in the Printer Driver" (Mac OS).
• If you change the roll unit from a take-up device to a feed device, first cut the paper that has been taken
up.
1.
Tap paper settings display area on Home screen of touch screen.
Important
• If the Home screen does not appear, tap the Home button.
2.
Tap or area.
3. Change function of roll unit.
•
Using as feed device
1.
Tap Roll unit use setting.
2.
Tap ON when message confirming roll unit's change to feed mode appears.
120