All in One Printer User Manual

Control Panel
Submenu Display
Press the Information button to display this information, one after another: the Maintenance Cartridge
capacity and remaining ink levels, paper information, and printer information.
Each time you press the Information button, the following submenus are displayed.
Note
Press any button other than the Information button to restore the previous mode.
After you display a submenu, the printer will revert to the previous mode in about ve seconds if no print
job is received or if you do not operate the printer .
Remaining Maintenance Cartridge capacity and ink levels
The remaining Maintenance Cartridge capacity is shown on the top level of the Display Screen .
The remaining level of each ink is shown on the bottom level of the Display Screen . Ink levels shown on the
Display Screen correspond to the inks identied by the color labels on the bottom of the Display Screen .
These symbols may be displayed above the ink level: “!” if ink is low , “×” if no ink is left, and “?” if you have
deactivated ink level detection.
Remaining ink is indicated as follows.
Information of the loaded paper
Here, the paper size, type, and related printer settings are displayed.
Printer information
Displays the rmware version, serial number , IP address, and hard disk capacity .
62 Printer Parts