All in One Printer User Manual

Network Setting (Windows)
Specifying the frame type using the printer Control Panel
1. Press the Menu button to display MAIN MENU .
2. Press ▲ or ▼ to select Interface Setup , and then press the ► button.
3. Press ▲ or ▼ to select NetW are , and then press the ► button.
4. Press ▲ or ▼ to select NetW are , and then press the ► button.
5. Press ▲ or ▼ to select On , and then press the OK button.
Return to the NetW are menu.
6. Press ▲ or ▼ to select Frame T ype , and then press the ► button.
7. Press ▲ or ▼ to select the frame type to use, and then press the OK button.
Return to the NetW are menu.
8. Press ▲ or ▼ to select Print Service , and then press the ► button.
9. Press ▲ or ▼ to select the desired print service, and then press the OK button.
Return to the NetW are menu.
10. Press the Online button to bring the printer online.
If any of the settings is changed, a message for conrmation is displayed. In this case, press
the OK button.
Note
• If an error message is displayed, check the settings and correct any invalid values.
• T o cancel the setup process, hold down the Stop button for a second or more.
Important
• Be sure to complete step 5. This will activate the values you have entered.
Network Setting 627