iPF850 User's Guide Ver.1.00

Pack the printer
1
Disconnect the printer power cord and interface cable, as well as the Roll Unit power cord.
Important
Turn off the printer before you unplug it. It may damage the printer if you unplug it before it is off and
transfer it in that state. If you accidentally unplug the printer, plug it in again, reinstall the ink tanks, and
follow this procedure again.
2
Open the Top Cover and lift the Ejection Guide.
3
Remove the four ejection supports and lower the Ejection
Guide.
4
Grasp the Belt, insert it between the Belt Stopper, and affix
the Belt Stopper with a hex screw at the position indicated.
Preparing to Transfer the Printer
iPF850
User's Guide
Maintenance and Consumables Other Maintenance
610