iPF765 User Manual Ver.1.00

Setting Item Description, Instructions
System
Setup
TrimEdge Reload Specify whether to trim the leading edge of the currently retrac-
ted roll when the roll is advanced. Cut the edge if you are con-
cerned about any marks left on the roll when the roll is left in
the retracted position.
Specify On to have rolls cut when printing begins after Sleep
mode or when the power is restored. Selecting Automatic will
trim the edge when the roll has been in the retracted position
for two days or more.
Rep.P.head Print Choose On to have the printer automatically execute the Ad-
vanced Adj. operations after you replace the Printhead. (See
"Automatic Adjustment to Straighten Lines and Colors (Head
Posi. Adj.).") →P.604
Nozzle Check In Frequency, specify the timing for automatic checks of noz-
zle clogging. Choose Standard to have the printer adjust the
timing for checks based on the frequency of nozzle use.
Choose 1 page to check once per page.
Select Warning > On to display warnings if the nozzles clog
during printing.
Use USB When Off is selected, the device can no longer be accessed
via USB.
Use Ethernet When Off is selected, the device can no longer be accessed
via Ethernet.
Use RemoteUI Choosing Off prohibits access from RemoteUI. Settings can
only be configured from the control panel.
Reset PaprSetngs Restores settings that you have changed with Media Configu-
ration Tool to the default values.
Erase
HDD Da-
ta
High Speed Erases file management data for print job data stored on the
printer's hard disk. (See "Erasing Data on the Printer's Hard
Disk.") →P.527
Secure High Spd. Overwrites the entire hard disk with random data. (See "Eras-
ing Data on the Printer's Hard Disk.") →P.527
Secure Overwrites the entire hard disk with 00, FF, and random data
(one time each). Verification is performed to check if the data
was correctly written. (See "Erasing Data on the Printer's Hard
Disk.") →P.527
Output
Method
Print Select the printing method for jobs received from software oth-
er than the printer driver. When using the printer driver, config-
ure settings on the printer.
To print as usual, select Print. Selecting Print (Auto Del) will
print the job and then delete the data from the printer's hard
disk. Selecting Save: Box 01 will only save the print job in the
box, without printing it.
Print (Auto Del)
Save: Box 01
Print After Recv A setting for jobs received from software other than the printer
driver. When using the printer driver, configure settings on the
printer. Select On to print the job after it has been saved.
Save: Shared Box Select Off to print without saving jobs in the box shared among
multiple users.
Show Job Log Selecting Off prevents display of the log in Job Menu > Job
Log. Additionally, the log is not printed if you choose Job
Menu > Print Job Log. Note that because job logs are not col-
lected, the Status Monitor accounting functions will not work
correctly.
iPF765 Menu Settings
User's Guide
Control Panel Printer Menu
509