iPF765 User Manual Ver.1.00
Cause Corrective Action
The NetWare server and serv-
ices are not configured cor-
rectly.
2.
Make sure there is enough free disk space on the NetWare file server. Insufficient disk space may prevent
you from processing large print jobs.
3.
Start NWADMIN or PCONSOLE and confirm that the print service is configured correctly and the print
queue is available.
4.
If data transmission to a printer on another subnet fails, deactivate NCP burst mode in that printer's network
protocol settings.
5.
If the printer is used in queue server mode, specify Other/Unknown as the printer type.
Cannot print over AppleTalk or Bonjour networks
Cannot print over AppleTalk or Bonjour networks
Cause Corrective Action
The AppleTalk protocol is not enabled
on the printer.
Activate AppleTalk on the printer.
(See "Configuring the Printer's AppleTalk Network Settings.") →P.556
The computer you are trying to print
from is not configured correctly.
Make sure the computer's AppleTalk settings are configured correctly.
(See "Configuring the Destination for AppleTalk Networks.") →P.555
(See "Configuring the Destination for Bonjour Network.") →P.553
The computer and printer are not on
the same network.
Due to the nature of Bonjour, you cannot print if the printer is on another network behind a router.
Make sure the computer and printer are on the same network. For information about network settings,
ask your network administrator.
iPF765
Cannot print over AppleTalk or Bonjour networks
User's Guide
Troubleshooting Cannot print over a network
673