iPF765 User Manual Ver.1.00

Handling sheets
Handling sheets
Loading Sheets in the Printer ............................................................................................................................. 465
Printing From a Desired Starting Point ............................................................................................................... 467
Removing Sheets ............................................................................................................................................... 470
Loading Sheets in the Printer
Loading Sheets in the Printer
Follow these steps to load sheets in the printer.
Important
One sheet of paper can be loaded in the Paper Feed Slot at a time. Do not load more than one sheet at a time. This may
cause paper jams.
Before feeding paper or printing, make sure the sheet is flat against the Roll Cover. The sheet may jam if it curls before
feeding or printing and the trailing edge drops toward the front.
Note
Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.
Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.
Load the paper straight. Loading paper askew will cause an error.
1
Select sheets as the paper source.
If a print job was received
Sheets are automatically selected, and the media type and size specified by the print job are shown on the
Display Screen. Go to the next step.
If no print job was received
1.
Press the Load button.
2.
Press or to select Load Cut Sheet, and then press the OK button.
Note
If any paper has been advanced that will not be used, a message is shown requesting you to remove it.
Press or to select "Yes", and then press the OK button. Remove the paper and go to the next step.
iPF765
Loading Sheets in the Printer
User's Guide
Handling Paper Handling sheets
465