iPF760 User Manual Ver.1.00

12
Click F Scaling and enter 120.
Note
You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom and right
edges of the paper will not be printed.
If the original size after enlargement or reduction is smaller
than the paper size, the original is printed in the upper-left
corner. In this case, you can center originals by selecting
E Print Centered on the Layout sheet.
13
Confirm the print settings and print as desired.
Note
For tips on confirming print settings, see "Confirming Print Settings(Windows) →P.179 "
Resizing Originals by Entering a Scaling Value (Mac OS X)
Resizing Originals by Entering a Scaling Value (Mac OS X)
This topic describes how to enlarge originals before printing by entering a scaling value, based on the following exam-
ple.
Document: Any Type
Page size: A4 (210.0 × 297.0 mm [8.3 × 11.7 in])
Paper: Roll paper
Paper type: Plain Paper
Roll paper width: A2/A3 roll (420.0 mm [16.5 in])
Resizing Originals by Entering a Scaling Value (Mac OS X)
iPF760
User's Guide
Enhanced Printing Options Printing enlargements or reductions
82