iPF760 User Manual Ver.1.00

Regular printing is selected, but a roll is loaded.
Regular printing is selected, but a roll is loaded.
Cause Corrective Action
A print job for printing on
sheets was sent when a roll
is loaded.
1. Press ▲ or ▼ to select Remove Roll Paper, and then press the OK button to stop printing.
2. After removing the roll, load and print on a sheet of the type and size of paper you have specified in the printer
driver.
(See "Removing the Roll from the Printer.") →P.447
(See "Loading and Printing on Sheets.") →P.24
Paper jam
Paper jam
"Push the release lever back."
Cause Corrective Action
A paper jam occurred
in the printer during
printing.
1.
Push the Release Lever back and remove the jammed paper.
(See "Clearing Jammed Roll Paper.") →P.604
(See "Clearing a Jammed Sheet.") →P.607
2. Load the paper.
3. Pull the Release Lever forward.
4. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK button.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.") →P.442
(See "Loading Sheets in the Printer.") →P.461
"Manually rewind the roll all the way and press OK."
Cause Corrective Action
A paper jam occurred
when advancing the
paper.
1.
Rewind paper on the Roll Holder manually, all the way, and then press the OK button.
2. Load the paper.
3. If "Not finished printing. Finish printing remaining jobs?" is shown on the Display Screen, press the OK but-
ton.
Printing will resume, starting from the page on which the error occurred.
(See "Loading Rolls in the Printer.") →P.442
Paper is crooked.
Paper is crooked.
Cause Corrective Action
Paper loaded crooked was detected when the paper was advanced. Follow these steps to reload the roll.
1.
Push the Release Lever back.
2. Adjust the right edge of the roll to make it parallel to the orange Paper
Alignment Line.
3. Pull the Release Lever forward.
(See "Loading Rolls in the Printer.") →P.442
If this error recurs after you reload the roll, remove the Roll Holder from
the printer, push the roll firmly in until it touches the Roll Holder flange,
and reload the Roll Holder in the printer.
(See "Attaching the Roll Holder to Rolls.") →P.439
Follow these step to reload a sheet.
iPF760 Regular printing is selected, but a roll is loaded.
User's Guide
Error Message Messages regarding paper
639