iPF760 User Manual Ver.1.00

Using RemoteUI

RemoteUI is software with which you can access the printer via the network from your Web browser to confirm the

printer status, operate jobs, and configure the settings. Since the software (Web server) for using RemoteUI is built in

the printer, preparing software other than a Web browser is unnecessary. You can use RemoteUI if an imagePROG-

RAF printer on a network is connected to your computer. If you start your Web browser and specify the IP address of

the printer, the RemoteUI screen is displayed, and you can use RemoteUI.

Important

• To use RemoteUI, an IP address must be set on the printer in advance. For the method of setting an IP address, see

"Configuring the IP Address on the Printer." →P.527

What You Can Do With RemoteUI

With RemoteUI, you can access the printer via a network, configure network settings, and display the current status of

the printer, various types of information, the processing status of jobs, etc.

Starting RemoteUI

Start RemoteUI by the following operations.

Start your Web browser.

Enter the following URL in Address or Location.

http://printer IP address or name/

Example: http://xxx.xxx.xxx.xxx/

The RemoteUI screen is displayed.

Note

• The screen slightly differs depending on the model of printer.

Configuring the Network With RemoteUI

For details on configuring printer settings for networks, refer to the following topics.

•

Configuring the Printer's TCP/IP Network Settings With RemoteUI →P.531

•

Configuring the Printer's AppleTalk Network Settings →P.546

•

Configuring the Printer's NetWare Network Settings With RemoteUI →P.539

•

Specifying Printer-Related Information →P.548

iPF760

Using RemoteUI

User's Guide

Network Setting Using RemoteUI

525