Basic Guide

8
The Stand is provided as a standard accessory with the iPF750 and iPF755.•
With the iPF650 and iPF655, the Stand is normally offered as an option, but it may be provided as a standard
accessory in some sales regions.
•
Front
A stand that holds the printer. Equipped with casters to facilitate moving it. (iPF750
and iPF755 only.)
When loading the sheets , move the guide to match the paper size.
All printed documents are ejected from this slot.
Release Lever
Control Panel
Ink Tank Cover
Paper Alignment Line
Maintenance Cartridge Cover
Maintenance Cartridge
Cutter Unit
Roll Ledge
Paper Feed Slot
Open this cover to install the Printhead and remove any jammed paper from inside
the printer, as needed.
Guides printed documents as they are ejected.
When loading paper, insert it here.
Open this cover to replace an Ink Tank .
Use this panel to operate the printer and check the printer status.
When releasing the Paper Retainer , push this lever back.
An orange line for alignment of paper.
Open this cover to replace the Maintenance Cartridge .
Absorbs ink used for maintenance purposes such as head cleaning. (Replace the
cartridge when it is full.)
A round-bladed cutter for automatic roll cutting.
When loading rolls, rest the Roll Holder here before loading it in the Roll Holder
Slot .
The Cutter Unit passes over this rail to cut paper. Cutter Rail
Output Tray
Ejection Guide
Top Cover
Stand
Open this cover to load rolls. Roll Cover
Names and functions of printer parts are as follows.
Parts
Width Guide
OperationName
d
e
g
h
i
j
c
b
k
l
m
n
o
p
a
f
Load the roll on this holder. Roll Holder q
Secure rolls on the Roll Holder with this part. Holder Stopper r
Load the Roll Holder into this holder slot. Roll Holder Slot t
Slide the Roll Holder along these slots. Roll Loading Slots s
f
m
aonc b c d
e
f
p
hi
j
kl
g
q r
t
t
s
s