iPF670/iPF770 Setup Guide Ver.1.00

ManualsBrandsCanon ManualsiB SeriesimagePROGRAF iPF670

Setup Guide

ENG

Introductory Information

Series Series

QT6-0555-V01 PRINTED IN XXXXXXXXXXXXXXXX ©CANON INC. 2014

QT60555V01

Preparations

(P.2)

Install the Ink Tanks

(P.3)

Install the Printhead

(P.4)

(P.14)

Load Paper to Adjust the Printhead

(P.5)

Store Accessories in the Pockets

(P.13)

(P.7)

Install the Software

How to Display the Electronic

Manuals

Caution

Instructions in this Setup Guide show the iPF770 printer and printer stand ST-34. Note that your printer and printer stand may look

different from these illustrations in some cases. However, basic operations are the same.

•

300mm

10mm

600mm

(When using the stand)

600mm

(When not using

the stand)

200mm

Details for each step are given in this Setup Guide. Simply follow the instructions

to install the printer.

If an error message is displayed during setup or other problems occur, refer to

"Responding to Messages" on page 16.

Introduction

Printer Installation space (W x D x H mm)

iPF670 Series (*1)

Without stand 1397 × 1308 × 807

Stand ST-27 1397 × 1700 × 1362

Overview of Setup

Space Required for Installation

Read this manual before attempting to operate the printer.

Keep this manual in a handy location for future reference.

iPF770 Series

MEM

Printera.

Roll holder: Already attached to printer

3-inch paper core attachment R

e. Printhead

f. Starter ink tanks (for rst-time installation)

C, M, Y, MBK x2, BK

Included paper

Package Contents

Some items are included with the printer but not described in this manual.

Keep these items in a safe place after setup because they are used in

various printing applications.

•

For instructions on the included items not described in this manual, refer to

the User's Guide.

•

A cable to connect the printer to a computer is not provided with the printer.

•

h. Setup Guide (this document)

i. Set of printer documentation

j. Set of CD-ROMs

k. Power cord

3-inch paper core attachment L

The Manuals Supplied with This Printer

• Canon, the Canon logo, and imagePROGRAF are trademarks or registered trademarks of CANON

INC.

• Microsoft is a registered trademark of Microsoft Corporation.

• Windows is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or other

countries.

• Windows Vista is a trademark or registered trademark of Microsoft Corporation in the U.S. and/or

other countries.

• Mac, Mac OS, OS X and Bonjour are trademarks of Apple Inc., registered in the U.S. and other

countries.

• All other trademarks or registered trademarks described in this Setup Guide are the property of

their respective owners.

Even if you do not use the printer driver, be sure to install Media

Conguration Tool from the provided User Software CD-ROM. With

Media Conguration Tool, the paper types that are available in your

area can be registered to the printer. For instructions on installation,

refer to "Install the Software" on page 7. (In Windows, select Install

Individual Software in the Setup Menu window to install Media

Conguration Tool only.)

•

A space larger than the following dimensions needs to be allocated when

setting up this printer.

1397 × 1480 × 1362

*1: A stand is optional for the iPF670 series. (It may be included as a

standard accessory in some locations.)

*2: The stands that are available differ between regions.

After installing the printer as shown in this Setup Guide, refer to the

manuals for instructions on operation and maintenance.

Printed Manuals

Quick Guide

The Quick Guide contains information such as warnings for using this

product safely and how to operate the navigation that is useful when

replacing paper, ink tanks, and the printhead.

Electronic Manuals

Basic Guide

The Basic Guide describes the following information.

• Loading paper, Replacing the consumables, Control Panel menus, and others

• Troubleshooting tips and Error messages

• Preparations for transferring the printer

User's Guide

This guide describes advanced usage of the printer such as paper saving tips,

how to print a poster and banner with the supplied software and print quality

adjusting method, in addition to the basic instructions for printing on roll paper or

cut sheet.

Paper Reference Guide

This guide describes about the types and specications of the available media on

the printer.

To refer to the electronic manuals Refer to "How to Display the Electronic

Manuals" (P.14)

l. Set of stands

(iPF770 series only)

A stand is optional for the iPF670 series. (It may be included as a standard

accessory in some locations.)

•

First, the stand needs to be assembled.

Refer to the Stand Setup Guide included with the stand for details on how

to assemble the stand.

Note that a stand is optional for the iPF670 series.

Stand ST-26

1704 × 1700 × 1362

Stand ST-34

1704 × 1480 × 1362

Stand ST-33

Stand used (*2)

Summary of content (16 pages)

PAGE 1
Introductory Information Series Series Setup Guide Introduction Caution ENG Read this manual before attempting to operate the printer. Keep this manual in a handy location for future reference. • Instructions in this Setup Guide show the iPF770 printer and printer stand ST-34. Note that your printer and printer stand may look different from these illustrations in some cases. However, basic operations are the same.
PAGE 2
Preparations 1 Prepare the printer for use by assembling the stand and connecting the power cord. 2 Assemble the stand. Refer to the Stand Setup Guide included with the stand for details on how to assemble the stand. Once you have finished, proceed to step 4. Remove the packing materials from the top of the printer. A stand is optional for the iPF670 series. (It may be included as a standard accessory in some locations.) If you are using the iPF670 series without a stand, proceed to step 2.
PAGE 3
Install the Ink Tanks 1 Install the 6 ink tanks. 2 Press the power button to turn on the printer. When the following screen appears, use the ▲ and ▼ keys to select a language and press OK. Language Data Message 3 Select your local time zone and press OK. Time Zone 㻝㻛㻞 English ᪥ᮏㄒ Français Italiano Deutsch Data Message Load 4 Instructions on ink tank installation are shown on the display screen. As instructed, grab the handle on the ink tank cover to open it.
PAGE 4
Install the Printhead 1 Next, install the printhead. Open Upper Cover is shown on the display screen. As instructed, open the top cover. • When installing the printhead, do not move the carriage (a) from the position shown in the figure. If you move the carriage (a), a warning noise sounds and the printhead cannot be installed. If you have moved the carriage (a), close the top cover. The carriage (a) moves to the position shown in the figure.
PAGE 5
Load Paper to Adjust the Printhead Load the included paper and adjust the printhead. 1 Select type of paper for printhead adj. is shown on the display screen. Check that Cut Sheet is selected and press OK. 2 Slide the width guide (a) and align it with the mark for the size of paper to be loaded. In this example, align the width guide with A2 to align it with the size of the sample paper. 3 Prepare one sheet of paper. Refer to the packaging for the paper to check which side is the printable surface.
PAGE 6
10 Pull the release lever forward. Printer setup is now complete. MEMO • The method for loading roll paper is given in the User's Guide, Basic Guide, and the control panel navigation function, which can be accessed using the procedure in "How to Display the Electronic Manuals" (P.14). Follow the procedure below to display the navigation on how to load roll paper. 1. Press Navigate. 2. Use the ▲ and ▼ keys to select Load Roll Paper and press OK. 3. Use the ▲ and ▼ keys to select View Op.
PAGE 7
Install the Software Request for cooperation with quality improvement of Canon Large Format Printer For development and marketing of products that better meet customer needs, Canon requests that you send information related to your Canon Large Format Printer to Canon through the Internet. Check the content of the "Extended Survey Program" window that is displayed during the software installation process.
PAGE 8
6 If you can agree Extended Survey Program, click Agree. 9 In the Printer Selection window, select The printer is connected directly to a computer and click Next. 7 10 If you can respond to the questionnaire, click Next. In the Printer Installation dialog box, select Install with USB Connection, and click Next. 8 11 MEMO 12 After reviewing the installation results in the Complete Installation window, click Next. 13 Confirm your questionnaire responses, and click Next.
PAGE 9
4 6 In the Printer Selection window, select The printer is connected to computers in a network and click Next. 5 When entering the printer's IP address manually When searching the available printer on the network After reading the precautions in the Getting Ready window, select Specify the IP address of available printers in the network and click Next. Proceed to step 8. After reading the precautions in the Getting Ready window, select Find available printers in the network and click Next.
PAGE 10
When the printer cannot be found on the network When ink fills the system for the first time, after printhead adjustment is finished, specify the IP address on the printer's control panel. No Paper Loaded OK:Setting/Adj. Menu Maint.C Remain.: 80% Tot.Print Area(m2): 678 MEMO 1. Select IPv4 and press OK. 2. Select IPv4 Settings and press OK. 3. Select IP Address and press OK. 4. Enter the IP address.
PAGE 11
Mac OS You can print from Mac OS via USB or network connections such as Bonjour or IP. Install the software depending on your computer environment. OS X v10.6.8 to v10.9 Install the software 1 • If you install the software, log onto the computer as an administrator. After making sure the printer is not connected to the computer, turn the computer on. Insert the provided User Software CD-ROM for your operating system in the CD-ROM drive.
PAGE 12
Select the printer 13 Select the method of connecting to the printer, and click Next. For USB connection, the printer is automatically added and you should proceed to step 17. 14 MEMO 16 Click Next. 17 Click Add Printer. 15 • You can view a description of adding printers by clicking Help. MEMO Select the Execute media type update check box and click Next. 18 MEMO 19 Click Exit. • The following screen is displayed while the media information is being updated.
PAGE 13
Store Accessories in the Pockets 1 2 Use the manual pocket to store the manual so you can refer to it as needed. When using the stand, store the 3-inch paper core attachment and other accessories in the accessory pocket. • The accessory pocket is included with the stand.
PAGE 14
How to Display the Electronic Manuals The electronic manuals for this printer are the User's Guide, Paper Reference Guide, and Basic Guide. For details on the content of each manual, refer to "The Manuals Supplied with This Printer" on P. 1. Viewing the User's Guide and Paper Reference Guide The User's Guide and Paper Reference Guide are not included with the printer. You can view each of the manuals on the Web from the links in the installed software by using the following procedure.
PAGE 15
3 Select the printer from the list of printers and click Options & Supplies. 4 6 Click Support. 7 5 Click Utility. Click the User Manual button. 8 Click Open Printer Utility. To display the user guide, click User's Guide. To display the Paper Reference Guide, click Paper Reference Guide. Viewing the Basic Guide The Basic Guide is stored on the User Software CD-ROM that is included with the printer. Use the following procedure to view it.
PAGE 16
Responding to Messages Error messages may appear on the display screen of the control panel during printer installation in some cases. If so, it may not indicate a problem with the printer, and the issue may be easily resolved. Common messages and the causes are listed here with corrective actions. For more information on other messages, refer to the User's Guide or Basic Guide. (See "How to Display the Electronic Manuals" on P.