iPF670 / iPF670E User's Guide Ver.1.10

Messages regarding printing or adjustment
Messages regarding printing or adjustment
Cannot adjust printhead. ...................................................................................................................................... 622
Borderless printng not possible. ........................................................................................................................... 617
Cannot adjust paper feed. .................................................................................................................................... 621
Check printed document. ..................................................................................................................................... 621
Cannot adjust paper feed.
Cannot adjust paper feed.
Cause Corrective Action
The Printhead nozzles are clogged. Execute Adj. Quality again, as follows.
1. Press the OK button to clear the error.
2. Print a test pattern to check the nozzles.
(See "Checking for Nozzle Clogging.") ➔P.549
3. Clean the Printhead if the nozzles are clogged.
(See "Cleaning the Printhead.") ➔P.550
4. Execute Adj. Quality again.
(See "Automatic Banding Adjustment.") ➔P.534
Highly transparent film is loaded that cannot be used
for automatic feed amount adjustment.
Press the OK button to clear the error, and then adjust the feed amount manually.
(See "Manual Banding Adjustment.") ➔P.536
Check printed document.
Check printed document.
Cause Corrective Action
The Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead.
(See "Cleaning the Printhead.") ➔P.550
iPF670
Cannot adjust paper feed.
User's Guide
Error Message Messages regarding printing or adjustment
621