iPF605 User Manual
Messages regarding ink
Messages regarding ink
Ink insufcient.
Cause Corrective Action
The ink level is low , so you cannot clean the
Printhead .
Press the OK button and replace the Ink T ank that is
low with a new Ink T ank .
( → P .470)
The ink level is low , so there may not be enough ink
to nish printing.
Press the OK button and replace the Ink T ank that is
low with a new Ink T ank .
( → P .470)
Y ou can print until the ink runs out by pressing the
Online button. However , if the ink runs out during
printing, the following situation will occur depending
on the position of the leading edge when it passes
through the printer .
1. No ink left. is displayed and printing stops. Press
the Stop button to cancel printing, or press the
OK button, replace the ink tank that is low with a
new one, and continue printing. However , note
that because printing is paused, colors may be
slightly dif ferent.
( → P .470)
2. Ink tank empty . Canceling printing of this
page. is displayed and printing stops. After the
paper is ejected, press the OK button and replace
the ink tank that is low with a new one.
( → P .470)
No ink left.
Cause Corrective Action
There is no ink left. Open the Ink T ank Cover and replace the Ink T ank
for which the Ink Lamp is ashing.
( → P .470)
546 Error Message