iPF6000S User Manual

Messages regarding paper
Roll printing is selected.
Cause Corrective Action
Load a roll and try printing again.Y ou have attempted to print a test print sheet or
other printer status information on a roll, but no roll
is loaded.
T o print on a sheet instead, hold the Stop button for
more than a second to cancel printing, load a sheet,
and then print.
( → P .93)
Roll printing is selected, but sheets are loaded.
Cause Corrective Action
Press the Load/Eject button and remove the sheet.
( → P .154)
Load a roll and try printing again.
( → P .1 18)
A print job for rolls was received when a sheet is
loaded.
Hold down the Stop button for a second or more to
cancel printing.
The roll is empty .
Cause Corrective Action
The roll is empty . Follow these steps to replace the used roll with a new
roll of the same type and size.
1. Remove the roll.
( → P .120)
( → P .121)
( → P .122)
2. Load the new roll.
( → P .1 15)
( → P .1 17)
( → P .1 18)
3. If no barcode was printed on the roll, specify the
type of paper .
( → P .1 13)
4. If no barcode was printed on the roll, specify the
paper length.
( → P .1 14)
5. If Not nished printing. Finish printing
remaining jobs? is shown on the Display Screen ,
press the OK button.
Printing will resume, starting from the page on
which the error occurred.
688 Error Message