Operation Guide

Register the color tones for the ACCT function
The automatic correction color tone (ACCT) function corrects slight color deviations in the color
tones that can occur over time.
In order to enable the ACCT function in the future, you must first register the color tones. It is
recommended to do the registration right after print system installation.
[98] The status and options of the automatic correction color tone function
Before you begin
Perform a printer calibration to make sure that the print system is in optimal condition.
Procedure
1.
Touch [System] -> [Color adjustment].
2.
Touch [Auto Correct Color Tone] -> [Register targets].
3.
Select the location in which you want to store the measured values of the color tones.
4.
Touch [OK].
5.
Select the media.
IMPORTANT
Do not stop the registration procedure before it has completed.
6.
Touch [OK].
7.
Follow the instructions on the control panel.
8.
Close the menu.
Register the color tones for the ACCT function
172
Chapter 6 - Keep the image quality high
imagePRESS C800 Series