User Manual

NOTE

■

If there are instructions on the package of paper about which side of the paper to

load, follow those instructions.

■

When paper is loaded into the paper tray, the side facing down is the one printed

on.

■

If problems occur, such as poor print quality or paper jams, try turning the paper

stack over, and reload it. However, you cannot turn the texture paper and 1-Sided

Coated paper over. Change the new paper.

■

When loading paper, make sure that the height of the paper stack does not exceed

20 mm / 0,79". If the height of the paper stack exceeds 20 mm / 0,79", the edges

of the paper stack may become curled or creased, and poor print quality may result.

Lower the paper holder plate.

Change the paper tray's size plate to match the new paper size.

Gently push the paper tray back into the machine until it clicks into place in the closed

position.

Chapter 9 - Paper, toner, and staples 233

Adjust the paper tray to hold a different media size