User Manual

DescriptionValuesSetting
Here you can define the required number of staples.
Furthermore you can define where you want the sta-
ples with the 'Location' option.
The available locations for the 1 staple option:
■
'Top left'
■
'Top right'
■
'Bottom left'
■
'Bottom right'
The available locations for the 2 staples option:
■
'Left edge'
■
'Top edge'
■
'Bottom edge'
■
'Right edge'
Check the preview for the result of the selection.
'None'
'1 staple'
'2 staples'
'Saddle
stitching'
'Saddle press-
ing'
'Binding'
'None''Trimming'
Trims the long edge, top edge and bottom edge ac-
cording to the specified values. The minimum trim
size is 2 mm.
'Trim size'
Trims the prints to a selected default size, for example
A4, A5 etc. You can also define a custom size.
'Finishing
size'
Settings for the whole job
#
DescriptionValuesSetting
By default, all copy jobs are named 'Copy job' with a
sequence number. To identify your copy job more
easily in the list of waiting jobs or scheduled jobs, you
can change the name of the copy job. When you touch
the 'Job name' button a keyboard appears.
'Job name'
Chapter 7 - Copy jobs 185
Description of the copy job settings