User Manual
Table Of Contents
- Contents
- Chapter 1 Preface
- Chapter 2 Explore the print system
- Chapter 3 Explore the ease of operation
- Chapter 4 Start the print system
- Chapter 5 Adjust the control panel
- Chapter 6 Prepare the system
- Chapter 7 Prepare the jobs
- Chapter 8 Plan the workload
- Chapter 9 Plan the jobs
- Chapter 10 Print the jobs
- Chapter 11 Keep the colour quality high
- Chapter 12 Perform colour adjustments
- About colour adjustments
- Automatic colour mismatch correction
- Create a trapping preset
- Perform a manual shading correction
- Adjust CMYK curves for a job
- Adjust CMYK curves for a media family
- Correct the colour tones with the ACCT function
- Register the custom media for automatic gradation adjustment
- Create media families and output profiles
- Chapter 13 Perform media adjustments
- Chapter 14 Maintain the print system
- System configuration and maintenance
- Refill toner and staples
- Consumables
- Check the filling level of the toner cartridge
- Replace a toner cartridge
- Check the filling level of the waste toner container
- Replace the waste toner container
- Check the filling level of the staple cartridge
- Replace the staple cartridge in the staple unit of the stacker / stapler
- Replace the staple cartridge in the saddle-stitch unit of the stacker / stapler
- Remove staple and punch waste
- Clean print system parts
- Cleaning tasks and procedures
- Clean the control panel
- Clean the glass plate area
- Clean the automatic document feeder scanning area
- Clean the scanning sensors
- Clean the rollers of the automatic document feeder
- Clean the inside of the print module
- Clean the corona assembly wires
- Clean the clean roller
- Refresh the fixing roller
- Maintain print system parts
- Install system software
- Read the counters
- Chapter 15 Help
- Chapter 16 References
- Index
Supported media sizes per paper input option
Media size Internal
paper
tray
Special
feeder
Bulk
paper
module
Paper
module
Inserter
330 mm x 483 mm
13" x 19"
305 mm x 457 mm
12" x 18"
SRA3
320 mm x 450 mm
12.6 " x 17.7"
A3 / 11" x 17"
297 mm x 420 mm
11.7" x 16.5"
A4 / LTR
297 mm x 210 mm
11.7" x 8.3"
A4R / LTRR
210 mm x 297 mm
8.3" x 11.7"
A5R / STMTR
148 mm x 210 mm
5.8" x 8.3"
Custom sizes *1 *2 *3 *4 *5
*1 Custom sizes for internal paper tray:
100 mm x 148 mm - 330.2 mm x 487.7 mm / 3.9" x 5.8" - 13" x 19.2"
*2 Custom sizes for special feeder:
139.7 mm x 487.7 mm - 330.2 mm x 762 mm / 5.5" x 19.2" - 13" x 30"
*3 Custom sizes for bulk paper module:
182 mm x 182 mm - 330.2 mm x 487.7 mm / 7.2" x 7.2" - 13" x 19.2"
139.7 mm x 182 mm - 182 mm x 487.7 mm / 5.5" x 7.2" - 7.2" x 19"
*4 Custom sizes for paper module:
139. 7 mm x 182 mm - 330.2 mm x 487.7 mm / 5 1/2" x 7.2" - 13" x 19.2"
*5 Custom sizes for inserter:
182 mm x 182 mm - 330.2 x 487.7 mm / 7.2" x 7.2" - 13" x 19.2"
Supported media sizes per paper input option
308
Chapter 16 - References
imagePRESS C10000VP