User Manual
Table Of Contents
- Contents
- Chapter 1 Preface
- Chapter 2 Explore the print system
- Chapter 3 Explore the ease of operation
- Chapter 4 Start the print system
- Chapter 5 Adjust the control panel
- Chapter 6 Prepare the system
- Chapter 7 Prepare the jobs
- Chapter 8 Plan the workload
- Chapter 9 Plan the jobs
- Chapter 10 Print the jobs
- Chapter 11 Keep the colour quality high
- Chapter 12 Perform colour adjustments
- About colour adjustments
- Automatic colour mismatch correction
- Create a trapping preset
- Perform a manual shading correction
- Adjust CMYK curves for a job
- Adjust CMYK curves for a media family
- Correct the colour tones with the ACCT function
- Register the custom media for automatic gradation adjustment
- Create media families and output profiles
- Chapter 13 Perform media adjustments
- Chapter 14 Maintain the print system
- System configuration and maintenance
- Refill toner and staples
- Consumables
- Check the filling level of the toner cartridge
- Replace a toner cartridge
- Check the filling level of the waste toner container
- Replace the waste toner container
- Check the filling level of the staple cartridge
- Replace the staple cartridge in the staple unit of the stacker / stapler
- Replace the staple cartridge in the saddle-stitch unit of the stacker / stapler
- Remove staple and punch waste
- Clean print system parts
- Cleaning tasks and procedures
- Clean the control panel
- Clean the glass plate area
- Clean the automatic document feeder scanning area
- Clean the scanning sensors
- Clean the rollers of the automatic document feeder
- Clean the inside of the print module
- Clean the corona assembly wires
- Clean the clean roller
- Refresh the fixing roller
- Maintain print system parts
- Install system software
- Read the counters
- Chapter 15 Help
- Chapter 16 References
- Index
Consumables
on page 214
Supported media types per paper input option
on page 306
Supported media sizes per paper input option
on page 308
Supported envelope types per paper input option
on page 309
Before you begin
• Check and prepare the media. See:
Check and prepare media before loading
on page 155
Check and prepare envelopes before loading
on page 157
Check and prepare transparencies before loading
on page 159
• Awake the print system from sleep mode, if applicable. See:
Use the energy save modes
on page 52
Procedure
Action
1 Press the button (1) to open the bulk paper tray
(2).
When the media size does not change continue with step 5, otherwise go to step 2.
2 Slide the right-hand paper guide to the right-
hand side of the paper tray.
3 Lift the feeding support roller and remove all
media.
4 Squeeze the lever and slide the paper guides
so that there is enough space to load the me-
dia.
4
Load media into the bulk paper module
Chapter 10 - Print the jobs
165
imagePRESS C10000VP