User's Manual

65
Scan Panel
Scan Panel is software for controlling scanning operations such as
feeding documents and stopping scanning when scanning multiple
documents one after the other.
Scan Panel runs when [Feeding Option] is set to [Panel-Feeding] in
the settings dialog box of the scanner driver. In this case, the Scan
Panel appears when you are not scanning and the scanner enters the
wait state.
If you place the next document and then click the Start button in Scan
Panel, scanning of the placed document starts.
You can stop scanning part way through by clicking the [STOP] button
of Scan Panel.
Settings for Third Party Software
Precautions for using PaperPort
If you use the bundled software PaperPort with the settings still set to
the defaults, scanning will not be able to be performed properly when
the page size is detected automatically with the scanner driver of this
product. After installing the scanner driver of this product and
PaperPort, use the following procedure to start Scanner Setup Wizard
and change the settings.
1 Click the Start button, and then click [All Programs],
[ScanSoft PaperPort11], and [Scanner Setup Wizard].
2 Click [Next] three times.
3 Click [Yes] and then click [Next] when the following
screen appears
Hint
Click [Yes] when the following screen appears.