User Guide

59
Specifying the Scan Area
Configure the following settings when you want to specify the area of
the document to be scanned.
Specifying an area
Specify the area of the document to be scanned in the Scan Area
dialog box, which is opened from the [Area] button on the [Basic] tab.
Configuring Scanner Settings According
to Purpose
Set the scanning conditions according to the scanning purpose.
When you want to delete the images of the blank pages in
two-sided documents
Set the scanning side setting to [Skip blank page] on the [Basic] tab to
delete the images of the blank pages in the document.
If [Skip blank page] is selected, the [Setting] button is enabled, and
you can adjust the level for judging whether pages are blank.
When you do not want to scan colored lines and text
Specify the color (red, blue, green or Color Elimination) to be ignored
(dropped out) in the color drop-out settings on the [Image processing]
tab, and that color will not be scanned.