User Manual

• Laminated documents may not be scanned correctly, depending

on the document.

• It is recommended that thin documents be fed one page at a time.

• Scanning the following types of documents can cause a paper jam

or malfunction. To scan such a document, make a photocopy of the

document and then scan the photocopy.

Business Card

Size: 50 mm x 85 mm (1.97" x 3.35") or larger

Paper thickness: 380 g/m

(80 lb bond) 0.45 mm (0.0177") or larger

Orientation: Vertical feeding only

Eject method: Straight path only

IMPORTANT

If a stack of business cards cannot be fed properly, reduce the

number of cards in the stack.

Card (plastic)

Size: 54 mm x 86 mm (2.12" x 3.37") (ISO standard)

Card thickness: 0.76 mm (0.03") or less, 1.4 mm (0.055") or less

for the embossment

Orientation: Vertical or horizontal feeding (only vertical for

embossed cards)

Eject method: Straight path only

Loading capacity: 3 cards (non-embossed), 1 card (embossed)

CAUTION

• Use the straight path when scanning cards.

• Embossed cards may not be able to be scanned correctly,

depending on the type of embossment.

There are creases or

fold lines.

Carbon paper

There are curls. The surface is coated.

There are tears.

Extremely thin document

such as semi-transparent

thin paper.

There are clips or

staples.

Documents with excessive

paper dust particles.