User Manual

5-17
Chapter 5 Maintenance
CAUTION
Do not touch the metal contacts on the ink cartridge. Doing so may
cause poor connections, resulting in poor print quality.
Imprinter Testing
After replacing an ink cartridge or cleaning the print head, perform
a test print to confirm proper printing. Test printing is performed by
the “Imprinter Test” User Mode selection.
IMPORTANT
Before performing an Imprinter Test, load a sheet of paper into the
Document Feed Tray.
■ Performing an Imprinter Test
Use the following procedure to execute the Imprinter Test.
1. Load a sheet of paper into the Document Feed Tray
for test printing.
2. Press the Menu key on the control panel.
The User Mode is activated.
3. Press the [ ] key once to display “Imprinter Test”.
4. Press [Enter].
Menu Key
Enter Key