User Manual

8-21
Chapter 8 ISIS/TWAIN Driver Settings
[Panel-Feeding] or [Automatic Feeding] Feeding Option
[Auto]
Each batch of documents is saved with different file
names.
[Panel]
A batch is separated when you press the [New File] key on
the control panel to start or continue scanning.
Batch Separation (when a patchcode decoder is
installed)
When the optional patchcode decoder is installed, batch
separation by patchcode is enabled for all feeding option
settings.
[Standard Feeding] Feeding Option
[Manual Feeding] Feeding Option
[Panel-Feeding] or [Automatic Feeding] Feeding Option
[Patchcode]
Batches are separated whenever a patchcode sheet is
detected between documents. (See “Using Patchcode
Sheets (Option)” on p. 3-20.)
IMPORTANT
• When [Patchcode] is selected, the [Folio] Scanning Side
setting on the [Basic] tab sheet is not available.
• When Multi-Stream is enabled in the application program,
[Patchcode] is not displayed.
Patchcode Orientation (ISIS driver only)
This function is enabled when the optional patchcode
decoder is installed and batch separation is set to
[Patchcode]. Set the orientation to match that of the
patchcode of the patchcode sheet.
Hint
Settings for various patchcode types and orientations on
document pages are as follows.
Patch T
(File A)
Patch II
(File B)
Patchcode
Orientation
0 degrees 90 degrees 180 degrees 270 degrees