User Manual

8-11
Chapter 8 ISIS/TWAIN Driver Settings
[Area] button
Open the [Scan Area] dialog box to specify the area to
scan. (See “[Scan Area] Dialog Box” on p. 8-12.)
IMPORTANT
The [Area] button is not displayed if the application program
provides its own function to specify the scan area.
■ Mode-Dependent Function Limitations
The following tab sheet functions are partially disabled
according to the selected mode. For details on the
[Brightness] tab sheet settings, see “[Brightness] Tab
Sheet” on p. 8-14.
✔ : available for setting, – : not available for setting, or auto
■ [Auto Image Type Detection Settings] Dialog
Box
This dialog box appears when you select [Auto Color
Detection], and enables you to make settings for detecting
whether scanned images are in color or black-and-white,
and select the mode to use when an image is detected as
black-and-white.
Color Saturation/Proportion of Color
These settings are for judging whether a document is in
color.
Depth of color in documents is detected by [Color
Saturation], and [Proportion of Color] is used to judge a
color document.
IMPORTANT
• Changing these settings is not normally necessary. Change
them only if you want a document of light colors to be judged
to be a black-and-white document.
• Select [24-bit Color] if color documents are judged to be black-
and-white documents with the default settings.
[Mode in case of binary]
Select the scanning mode when a page is judged to be
black-and-white.
Settings Tab Sheet
Basic Image processing Others
Deskew Moire Reduction Edge emphasis Erase Dot Border Removal Prevent Bleed Through / Remove Background Color drop-out JPEG Transfer Batch Separation (ISIS driver) Prescan
Scanning Modes
Auto Color
Detection
✔✔✔✔✔ ✔ – ✔ ––
Black and White ✔✔✔✔✔ ✔ ✔ – ✔✔
Error Diffusion ✔✔✔ – ✔✔✔– ✔✔
Advanced Text
Enhancement
✔✔✔✔✔ – ✔ – ✔✔
Advanced Text
Enhancement II
✔✔ – ✔✔ – ✔ – ✔✔
256-level Gray ✔✔✔ – ✔✔✔✔✔✔
24-bit Color ✔✔✔ – ✔✔ – ✔✔✔