User Manual
Chapter 3 Appendix
- 39 -
× An Error Code Is Displayed on the Display Panel
The following are possible causes of an error message displayed on the display
panel of the scanner. Check each possible cause.
Error Code
Problem
Solution
This error code is displayed if the front unit of the scanner is open.
Close the front unit of the scanner. For more information on closing
the front unit, see "6. Handling Paper Jams/Double Feed Detection,"
on p.23.
Error Code
Problem
Solution
This error code is displayed if a paper jam is detected.
Open the front unit of the scanner, and remove the document. For
more information on removing documents, see "6. Handling Paper
Jams/Double Feed Detection," on p.23.
Error Code
Problem
Solution
This error code is displayed if a double feed is detected.
Open the front unit of the scanner, and remove the document. For
more information on removing documents, see "6. Handling Paper
Jams/Double Feed Detection," on p.23.
Error Code
Problem
Solution
This error code is displayed if another type of error occurs.
Turn off the power switch, wait 10 seconds, and then turn the power
switch on again. If the "E" error code is still displayed, contact your
local authorized Canon Dealer, or service representative.