2510M_UM
Table Of Contents
- DR-2010C/DR-2510C/DR-2010M/DR-2510M User Manual
- Introduction
- Contents
- Chapter 1 Before Using the Scanner
- Chapter 2 Setup
- Chapter 3 Basic Operation
- Chapter 4 CaptureOnTouch Settings
- Chapter 5 Other Scanning Methods
- 1. Scanning with CapturePerfect 3.0
- 2. Basic Scanning Procedure
- 3. Using the Scan Panel
- 4. Special Scanning
- Enhancing the Text of a Document
- Scanning Documents That Include Both Color and Black-and-White Pages
- Scanning Different Sized Documents Together
- Skipping Blank Pages
- Scanning (Single-Sided) 11" X 17"/A3 Documents
- Deskewing Documents
- Moire Reduction
- Correcting the Text Orientation of Documents
- Reducing Bleed Through for Thin Documents and Documents with Dark Reverse Sides
- Deleting Borders and Ruled Lines of a Specified Color (Red/Green/Blue)
- Enhancing the Red color for Black-and-White Scanning
- Creating Smaller Files
- Saving the Text Data of Documents as Search Keywords
- Specifying Security Settings for PDF Files (Windows only)
- Chapter 6 Scanner Driver Settings
- 1. Before Using the Scanner
- 2. Scan driver settings
- Scan Mode Settings
- Auto Color Detection
- Paper Size Settings
- Scan Resolution Settings
- Scanning Side Settings
- Correcting Image Skewing
- Moire Reduction
- Adjusting the Scan Area
- Brightness/Contrast Adjustment
- Gamma Curve Settings
- Image Contour Adjustment
- Image Rotation
- Correcting Text Orientation
- Removing the Document Background/Preventing Bleed Through
- Omitting a Specific Color
- Enhancing the Red Color
- Rapid Recovery System
- Double Feed Detection
- Feeding Options
- Prescan
- Registering Scanning Conditions
- Checking the Version
- Chapter 7 Maintenance
- Chapter 8 Troubleshooting
- Chapter 9 Appendix
- INDEX
Back Previous Page Next Page
Contents
53
12
When scanning is complete, select [Exit] from the [File] menu to quit
CapturePerfect.
Registering Scan Jobs and Scanning
You can register the scanning conditions and scan mode in advance as a job with
CapturePerfect. By selecting [Scan Job] from the [Scan] menu, you can specify
these registered jobs and perform scanning.
Registering Scan Jobs
Perform the following to register jobs.
1
Select [Job] from the [Edit] menu.
The [Register/Edit/Delete] dialog box appears.
NOTE
The following jobs are already registered to job numbers 01 and 02.
2
Select a job number to register ([No.]), and click [Create/Edit].
The [Create/Edit] dialog box appears.
3
Enter the job title.
NOTE
Job titles may consist of up to 64 alphanumeric characters.
4
Specify a function in the [Function] list box.
[Scan To PC]:
Saves scanned images to a specified computer.
Job Number Job Title Job Type
01 Color Document ScanToPC
02 Binary Document ScanToPC