User Manual

Back Previous Page Next Page
Contents
DR-2010C / DR-2510C
DR-2010C / DR-2510C
12
IMPORTANT
• If you do not know the requirements for your computer system, contact the
store where you purchased the computer or the manufacturer of the
computer for more information.
• Use the latest USB 2.0 driver made available by Microsoft. For details,
consult your local authorized Canon dealer.
• Use the USB interface provided as standard with your computer. However,
normal operation is not guaranteed with all USB interfaces, even if present
as standard equipment on the computer. For details, consult your local
authorized Canon dealer.
• Scanning speeds are lower if your computer's standard USB interface is USB
Full-Speed (equal to USB 1.1.)
• The USB cable you are using should be the one originally included with the
scanner.
• If the CPU, memory, interface card, and other specifications do not satisfy
the installation requirements, the scanning speed may be greatly reduced
and transmission may take a long time.
• Even if the computer satisfies the recommended specifications, the scanning
speed may vary, depending on the specified scan settings.
• The ISIS/TWAIN Drivers provided with the scanner do not necessarily
operate on all ISIS or TWAIN-compatible applications. For details, contact
your application software retailer.
This section describes how to install the required software.
The following software is included on the DR-2010C/DR-2510C Setup disc.
• DR-2010C/DR-2510C Driver
The scanner driver for using the DR-2010C/DR-2510C.
• CapturePerfect 3.0
An ISIS compatible application developed for use with Canon document
scanners.
NOTE
The Setup disc of the DR-2010C/DR-2510C is configured as follows. Install the
software using either [Typical Installation] or [Custom Installation].
Setup Disc
2. Installing the Software
2 Installing the Software
2
.
Installing
the
Software
Menu Screen Typical Installation
Read Manuals Custom Installation