imageCLASS MF7280 Copying Guide

Frame Erase
3-15
3
Special Copying Features
4 Press [-] or [+] to set the frame erase width.
NOTE
• To enter values in millimeters, press [mm].
• When entering the value in millimeters, you can also use - (numeric keys),
and (Clear) to clear your entry.
• You can change the value by pressing [-] or [+], even if you have entered the value
using - (numeric keys).
• If you enter a value outside the setting range, a message prompting you to enter an
appropriate value appears on the screen.
• The default setting is '1/8" (4 mm)'. The maximum original frame erase width that
you can set is '1 15/16" (50 mm)'.
● If you want to set the same width for all four borders:
❑
Press [-] or [+] to set the frame erase width ➞ press [OK].
The selected mode is set.