imageCLASS MF6500 Series Advanced Guide

1
2
3
4
5
6
7
8
TOP
Back Previous Next
3-11
Table of Contents
Index
Advanced Fax
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
Reports and Lists
Troubleshooting
Appendix
4. Confirm that <TCP/IP SETTINGS> is
displayed, then press [OK].
5. Use [ ] or [ ] to select the allocation
method of the IP address, then press [OK].
<IP ADDRESS AUTO.>: Allocates an IP address to the machine
automatically.
<IP ADDRESS>: Allocates a fixed IP address to the machine.
Skip to step 9.
6. Use [ ] or [ ] to select <ON>, then press
[OK].
7. Use [ ] or [ ] to select the desired
protocol (DHCP, BOOTP, or RARP), then
press [OK].
8. Use [ ] or [ ] to select <ON>, then press
[OK].
Skip to step 14.
9. Use the numeric keys to enter the IP address
number, then press [OK].
10.Confirm that <SUBNET MASK> is displayed,
then press [OK].
11.Use the numeric keys to enter the subnet
mask number, then press [OK].
12.Confirm that <GATEWAY ADDRESS> is
displayed, then press [OK].
13.Use the numeric keys to enter the gateway
address number, then press [OK].
14.Press [Stop] to return to standby mode.
15.Restart the machine.