imageCLASS MF6500 Series Advanced Guide

1
2
3
4
5
6
7
8
TOP
Back Previous Next
1-9
Table of Contents
Index
Advanced Fax
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
Reports and Lists
Troubleshooting
Appendix
2. Confirm that the modem’s connecting sound
is heard, then press [Start].
3. Hang up the external telephone.
FaxTel: Optional Settings
If required, change the optional settings as follows:
1. Press [Additional Functions].
2. Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3. Use [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4. Use [ ] or [ ] to select <FAX/TEL OPT.
SET>, then press [OK].
5. Confirm that <RING START TIME> is
displayed, then press [OK].
6. Use [ ], [ ], or the numeric keys to
select the duration (0 to 30 seconds) for
which the machine detects the fax tone
before it starts ringing, then press [OK].
7. Confirm that <F/T RING TIME> is displayed,
then press [OK].
8. Use [ ] or [ ] to select the duration (15
to 300 seconds) for the phone to ring, then
press [OK].
9. Confirm that <F/T SWITCH ACTION> is
displayed, then press [OK].
10.Use [] or [] to select the action the
machine will take after the ringing ends, then
press [OK].
<RECEIVE>: Switches to receive mode.
<DISCONNECT>: Disconnects the call.
11.Press [Stop] to return to standby mode.