imageCLASS MF6500 Series Advanced Guide

1
2
3
4
5
6
7
8
TOP
Back Previous Next
5-2
Table of Contents
Index
Advanced Fax
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
Reports and Lists
Troubleshooting
Appendix
Checking Job and Machine Status
System monitor enables you to view the transmission and
reception results, monitor the status of the copy, fax, print
jobs currently being processed.
■ Checking Transmission/Reception
Results (MF6550/MF6560/MF6580 Only)
1. Press [System Monitor].
2. Use [ ] or [ ] to select <TX/RX LOG>,
then press [OK].
3. Use [ ] or [ ] to view the required
transmission/reception result.
4. Press [Stop] to return to standby mode.
NOTE
If you set <CHECKING THE LOG> to <OFF> in <SYSTEM
SETTINGS>, transmission/reception result does not appear in
the LCD.
■ Checking and Deleting Transmitting/
Received Documents Stored in Memory
(MF6550/MF6560/MF6580 Only)
1. Press [System Monitor].
2. Use [ ] or [ ] to select <RX/TX
STATUS>, then press [OK].
3. Use [ ] or [ ] to select the desired
document, then press [OK].
If you select a document with the message <TX STNDBY>,
<TX TRM...>, or <RX TRM...>, skip to step 6.
4. Use [] or [] to select <CANCEL> or
<TRANSFER>, then press [OK].
<TRANSFER>: To send the document.
<CANCEL>: To delete the document, skip to step 6.
NOTE
You can select <TRANSFER> only for the received document in
memory.