imageCLASS MF6500 Series Advanced Guide

1
2
3
4
5
6
7
8
TOP
Back Previous Next
1-4
Table of Contents
Index
Advanced Fax
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
Reports and Lists
Troubleshooting
Appendix
■ Redialing
Redialing can be done manually or automatically. For automatic
redialing, you can set how many times the machine redials and
the time between redials.
Redialing Manually
1. Press [FAX].
2. Press [Redial] to dial the last number you
entered using the numeric keys.
To cancel manual redialing, press [Reset].
3. Press [Start] to dial the number.
When you set the documents on the platen glass, use [ ] or
[ ] to select the document size, then press [Start] for each
document. When scanning is complete, press [OK] to start
dialing.
NOTE
When <TIME OUT> is set to <ON> in <TX SETTINGS> in <FAX
SETTINGS>, the machine starts dialing automatically after a
preset time.
Redialing Automatically
1. Press [Additional Functions].
2. Use [ ] or [ ] to select <FAX
SETTINGS>, then press [OK].
3. Use [ ] or [ ] to select <TX SETTINGS>,
then press [OK].
4. Use [ ] or [ ] to select <AUTO REDIAL>,
then press [OK].
5. Use [ ] or [ ] to select <ON>, then press
[OK].
6. Confirm that <REDIAL TIMES> is displayed,
then press [OK].
7. Use [ ], [ ], or numeric keys to enter the
number of redials the machine will make,
then press [OK].
8. Confirm that <REDIAL INTERVAL> is
displayed, then press [OK].