imageCLASS MF6500 Series Advanced Guide

1
2
3
4
5
6
7
8
TOP
Back Previous Next
7-5
Table of Contents
Index
Advanced Fax
Features
Advanced Copy
Features
Network
Remote UI
System Monitor
Reports and Lists
Troubleshooting
Appendix
Faxing Problems (MF6550/MF6560/MF6580 Only)
■ Sending Problems
Cannot send a fax.
Q Is the machine overheated?
A Unplug the machine and let it cool for about 5
minutes. Then plug in the machine and try sending
again.
Q Did you just turn on the machine?
A Wait until the machine is ready.
Q Is the machine set for the correct telephone line
type?
A Make sure the machine is set for the correct
telephone line type. (See “Set the Machine for
Sending Faxes,” in the Starter Guide.)
Q
Is your machine in fax mode?
A Press [FAX] to show the fax standby display.
Q Is the document loaded correctly?
A Make sure the document is correctly loaded. (See
Chapter 2, “Document Handling,” in the Basic
Guide.)
A Make sure the left cover is fully closed.
Q Is the one-touch speed dialing key or coded
speed dialing code you entered registered
correctly?
A Check that the speed dialing settings are
registered correctly. (See Chapter 4, “Sending
Faxes,” in the Basic Guide.)