imageCLASS MF5750/MF5770 Facsimile Guide

Setting the Receive Mode
5-5
Receiving Faxes
5
- Set the answering machine to answer on the first or second ring.
- The entire message should be no longer than 15 seconds.
- In the message, tell your callers how to send a fax.
■ When You Receive a Fax Call
The machine will receive the fax automatically.
■ When You Receive a Voice Call
The answering machine will record any voice messages.
Receiving with a DRPD (Distinctive Ring Pattern
Detection) Service: DRPD
If you want to select <DRPD>, check the following:
■ Select This Mode If:
• you only have one telephone line for both fax and telephone use.
• you want to receive faxes automatically as well as voice calls.
• you have subscribed to a DRPD (Distinctive Ring Pattern Detection) service with your
telephone company. This service assigns two or more fax/telephone numbers with
distinctive ring patterns to a single telephone line, allowing you to have both a fax
number(s) and a telephone number(s) using only one telephone line. The machine will
automatically monitor incoming calls and based on the ring pattern, will let you know if
the call is a fax or voice call. Contact your telephone company for more information on
this service.
■ You Will Need to:
• set <DRPD>. (See “Setting the Receive Mode,” on p. 5-1.)
• connect a telephone to the machine. (See “Connect the telephone cable and necessary
external device,” in the Set-Up Instructions (for MF5750 users) or Set-Up Instructions for
the Machine (for MF 5770 users).)
■ When You Receive a Fax Call
The telephone will ring according to the ring pattern you have chosen and the machine
receives the fax automatically.
■ When You Receive a Voice Call
The telephone will ring according to the ring pattern you have chosen. Pick up the handset
to answer the call.