User Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-28
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
2. Confirm that <MEMORY LOCK> is displayed,
then press [OK].
3. Use the numeric keys to enter the memory lock
reception password, then press [OK].
4. Press [ ] or [ ] to select <OFF>, then press
[OK].
The received documents are printed.
5. Press [Stop/Reset] to return to the standby
mode.
Remote Reception
Remote reception enables you to use an external telephone
connected to the machine to receive faxes manually. This can be
useful when the machine is not nearby or is being used by someone
else.
The default settings are as follows:
REMOTE RX: <ON>
REMOTE RX ID: <25>
■
–
–
Registering Remote Reception ID
Follow this procedure if you want to change the default remote
reception ID of 25.
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <FAX SETTINGS>,
then press [OK].
3. Press [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4. Press [ ] or [ ] to select <REMOTE RX>, then
press [OK].
5. Press [ ] or [ ] to select <ON>, then press
[OK].
6. Use the numeric keys to enter a new remote
reception ID (a combination of two characters
using 0 to 9), then press [OK].
7. Press [Stop/Reset] to return to the standby
mode.