User Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
10-17
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
MEMORY FULL
Description The machine is full of jobs.
Action Print, send, or delete any documents stored in
memory.
Action Divide the document stack or data into a few
parts and try again one by one.
Action Send the document with low resolution.
Action When this message appears while using the ADF,
the scanning document stops halfway. In this
case, clear the paper jam from the ADF.
Description The number of TX/RX jobs that can be stored in
memory reached the maximum.
Action The machine memory can store up to 256 fax
jobs including sending and receiving jobs. (Based
on the condition that the other party sends
the fax by the imageCLASS MF4270 with ITU-T
Standard Chart No.1, standard mode.)
Wait for the machine to send any faxes in
memory. Also print or delete any documents in
memory.
NOT AVAILABLE
Description You pressed the one-touch speed dialing key
that has already been registered, when you are
registering group dialing.
Description You selected the group dialing that has already
been registered, when you are registering a one-
touch speed dialing key.
Action Register the one-touch speed dialing key that is
not used.
NOT REGISTERED
Description No recipient is registered for the one-touch
speed dialing key or coded speed dialing code
you pressed.
Action Register the recipients before using the Address
Book function.
OUT OF TONER
CHANGE TONER
Description The toner ran out completely.
Action Replace the toner cartridge.