User Guide

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
6-16
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Port Number Settings
Depending on your network environment, you can change the port
number for each protocol.
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <SYSTEM
SETTINGS>, then press [OK].
If the System Password has been set, enter the System Password
using the numeric keys, then press [OK].
3. Press [ ] or [ ] to select <NETWORK
SETTINGS>, then press [OK].
4. Press [ ] or [ ] to select <TCP/IP SETTINGS>,
then press [OK].
5. Press [ ] or [ ] to select <PORT NO. SET.>,
then press [OK].
6. Press [ ] or [ ] to select the protocol of
which you want to change the port number
(LPD, RAW, HTTP, or SNMP), then press [OK].
7. Use the numeric keys to enter the port number,
then press [OK].
8. Press [Stop/Reset] to return to the standby
mode.
9. Restart the machine.