Service manual

Chapter 15
15-51
5. AGING Test (5: AGING TEST)
Not used.
6. FACULTY Test (6: FACULTY TEST)
Use it to check the operation of microswitches, sensors, speakers, and ADF.
7. BOOK Test (8: BOOK TEST)
Use it to turn on the contact sensor or to initialize the book reading position parameter.
List of Test Mode Items
To use test mode, press the Additional Functions key and # key; then, select 'SERVICE MODE'and select 'TEST
MODE'using the Left or Right Arrow key, and press the Set key.
To end test mode, press the Stop key and then the Additional Functions key.
F-15-28
1: D-RAM
[1] - - - [3]
TEST MODE [1] - [6],
[8]
******
2: CCD TEST
[1] - - - [8]
3: PRINT
[0] - - - [9] , [*] , [#]
3: PRINT (disabled)
3-1: WHITE
3: PRINT
3-2: BLACK
3: PRINT (disabled)
3-3: STRIPES
3: PRINT (disabled)
3-4: CHECKERS
3: PRINT (disabled)
3-5: CHECKERS-2
3: PRINT
3-6: ENDURANCE
3: PRINT (disabled)
3-7: BLACK/WHITE
3: PRINT
(disabled)
3: PRINT (disabled)
3-9: CHECKERS-3
1: D-RAM 14848K
1: D-RAM 14848K
******
3: PRINT (disabled)
3-8: BIAS
3: PRINT (disabled)
3-*: PRINTING AREA
3: PRINT (disabled)
3-#: CRG TEST
1-3: IRAM TEST (not used)