Fax Machine User Manual

6-2
Switching Temporarily to Tone Dialing
Many information services for banks, airline reservations, hotel reservations, etc., require tone dialing for their
services. If your machine is connected to a rotary pulse line, follow this procedure to set the machine temporarily
for tone dialing:
1
Press FAX to set to Fax Mode.
Ex:
2
Pick up the handset of your telephone.
3
Enter a destination using the numeric keys
on your telephone or using a one-touch
speed dialing key, coded speed dialing
code, Redial/Pause key or the numeric keys
on the machine.
4
When the recorded message of the
information service answers, press
T
(Tone) to switch to tone dialing.
Ex:
• When T (Tone) is pressed, T is displayed in the
LCD.
• If your telephone line uses tone dialing, go to the
next step.
5
Use the numeric keys on the machine to
enter the numbers requested by the
information service.
Ex:
• Numbers entered after pressing T (Tone) will be
dialed using tone dialing.
• After pressing T (Tone), you cannot use the
numeric keys on the telephone. Use the numeric
keys on the machine.
6
If you want to receive faxes, press Start.
7
Hang up to disconnect the call.
• Tone dialing is canceled when you disconnect the
call.
TEL= T34
TEL= T
FAX 12/03/2001 15:30
FaxTel STANDARD