User Guide

10-21
Maintenance
Transporting the Machine
Transporting the Machine
This section describes the required procedures before transporting the machine.
Follow this procedure to avoid vibration damage to
the machine when transporting it over a long
distance.
1
Turn off the main power switch.
2
Disconnect the power cord and all the
cables from the back of the machine.
3
If you are using the output tray extension,
fold the paper stopper, and then push the
output tray extension into the machine.
4
Hold the front side of the operation panel
with your hands.
5
Lift the scanning platform (A) until it is
locked. (You will hear an audible “click.”)
6
Hold the grip (A) on the right front side of
the toner cover.
7
Open the toner cover.