Copier User Manual

Margin Mode

3-6

Special Copying Features

Press [F2] (MARGIN).

The display for specifying the margin mode appears.

Press [F1] (LEFT MARGIN), [F2] (RIGHT MARGIN), [F3] (TOP

MARGIN), or [F4] (BOTTOM MRGN) to specify the type of

margin ➞ press [OK].

The Margin Width setting menu appears for the margin type you selected.

Press [F3] (-) or [F4] (+) to set the margin width (1 mm to 20

mm) ➞ press [OK].

You can also use the numeric keys to enter the margin width, and (Clear) to

clear the value.

If you enter a value outside the setting range, an error tone sounds. Enter a value

within the setting range.

The selected mode is set, and the Copy Basic Features screen returns.

NOTE

The default setting is '10 mm'.