Printer User Manual

Printing Directly from the Remote UI
5-28
5
How to Use the Direct Print Function
5 Specify the settings under [Print Settings] according to your
preference.
Details of each menu are shown below.
[Resolution] This setting specifies the resolution for printing.
Resolution is expressed in units of dpi (dots per inch),
indicating the number of dots in one inch. The higher the value,
the greater the resolution, allowing finer expression of detail.
 If [1200 dpi] is selected, the outline of characters and
diagrams can be finely printed. This is suited to printing data
containing fine lines and small characters.
 If [600 dpi] is selected, you can perform printing suited to
general documents and tables.
*
This function is not available on the imageRUNNER 5050.
[Copies] This setting enables you to specify the number of copies
printed.
[Paper Size] This setting specifies the output paper size.
 If [Auto] is selected, the most appropriate paper source is
selected according to the PDF file page size.
 If a setting other than [Auto] is selected, the file is printed so
that the orientation of the long edge of the PDF file page size
and the long edge of the selected paper matches.
If the PDF file page size exceeds the largest or smallest size of
the user defined paper, jobs are canceled. (They are not
included in the Prints count.)