Printer User Manual

Settings Menu
3-35
3
Printer Settings Menu
Fold Type
Off
*
, Z-Fold, and C-Fold
This setting selects whether the printouts should be Z-Folded or C-Folded.
[Z-Fold]
This setting enables you to specify that the printouts should be Z-folded.
IMPORTANT
 Paper with a Z-fold may be wrinkled depending on the type of paper and the
environment used.
 You cannot use this setting in combination with 'Booklet', 'Saddle Stitch',
[Rotate+Collate], or [Rotate+Group].
NOTE
 This function is available for selection if the Document Insertion/Folding Unit-F1 is
attached to the Saddle Finisher-AD2.
 You can select Z-fold for the following paper sizes and types:
- Paper sizes: 11" x 17", LGL, LTRR, A3, JIS-B4, or A4R
- Paper types: Plain Paper, Recycled Paper, or Color Paper
 The maximum number of sheets that can be output to the paper trays is 40.
 If you use this setting in combination with [Staple+Collate] or [Staple+Group], the
maximum number of sheets that can be stapled is 10. If the number of sheets is
greater than this, they will be collated, but not stapled.
 You can adjust the width to fold paper with [Z-Fold Placement Adjustment] in
Adjustment/Cleaning settings (from the Additional Functions screen). For details
on this setting, see the Reference Guide.
1
4
3
2
1