User Guide

2-2
Chapter 2 Setup
1. Setup Procedures
Perform the following setup procedures to prepare the scanner for use.
Step 1: Confirm the installation requirements. (See p. 2-3)
Step 2: Install the Software. (See p. 2-4)
Step 3: Connect the scanner to the computer. (See p. 2-6)
Step 4: Turn the power ON (Scanner recognition). (See p. 2-9)
IMPORTANT
• Make sure that you install the software before connecting the
scanner to the computer.
• If you connect the scanner to the computer before installing
the software, a wizard screen such as the one shown below
will appear when you turn the scanner ON. In this case, click
[Cancel] to close the wizard screen, and then turn the scanner
OFF.
• Windows 2000
•Windows XP
• Windows Vista