Operation Manual

If this setting moves any of the print data outside the printable area, the portion outside the printable area will not be
printed.
Offset Long Edge (Back)
Specify the print position by setting the offset value for the long edge on the back side of the paper. Increasing the value moves the
print position downward. Decreasing the value moves the print position upward.
-50.0 to ±0
to +50.0 (mm)
IMPORTANT
If this setting moves any of the print data outside the printable area, the portion outside the printable area will not be
printed.
Select whether to automatically perform error skip to bypass errors and continue printing when an error occurs with the print data. If
<Off> is selected, you can perform error skip by using the operation panel.
Off
On
NOTE
Error skip bypasses errors in print data, so the document may not be printed correctly.
You can manually perform error skip.
(Status Monitor) <Copy/Print Job> <Job Status> Select the document containing errors <Skip Error>
<Printer Settings> <Layout> <Offset Short Edge (Back)> Specify the offset
value
<Apply>
<Printer Settings> <Layout> <Offset Long Edge (Back)> Specify the offset value
<Apply>
Auto Error Skip
*
<Printer Settings> <Auto Error Skip> Select <Off> or <On>
Timeout
*
㻡㻝㻣㻌㻛㻌㻢㻣㻢